How To Demo A Bathroom

by admin

Want to know how to demo a bathroom! Do you want to replace your bathroom’s outdated tile? Do you wish to convert the tub into an open shower? You may already have a picture in mind of how you want your bathroom to appear at this point.

In 2015, a whopping 14.2 million households remodeled their bathrooms. According to Statistica, 39% of the people remodel their bathrooms because they wanted it and now can finally afford it.

Of course, doing it yourself will not provide the same outcomes as hiring a professional. However, if you want to save money, performing it yourself may be the answer.

Let us learn here how you can demo your bathroom. We will go in a systematic way in two phases with further steps.

A Complete Bathroom

Phase 1 – The Preparation ( How To Demo A Bathroom?)

Before you go on to the major demolition work, perform a few inspections and take certain measures.

Make Sure The Water And Electric Feedlines Are Disconnected

Your security should come first. You can hire a plumber and an electrician to turn off your water and electricity, especially if you aren’t comfortable with your skills in these areas.

It’s also good to know where your service meters are, especially your water meter. You may smash a pipe while demolishing the bathroom, causing water to flood your house. By knowing the water meter, you can quickly switch off the water supply, which would minimize any additional damage.

Have An Idea What Is Behind The Bathroom Tiles

You may have a wooden frame with wall sheeting, which is known as a hollow wall. If that’s the case, you should get expert assistance right away. You can be dealing with even asbestos sheets at your home. It’s a typical worry for many older residents. If your home is relatively new, you should still call an expert, such as an occupational hygienist to test the materials before you start working.

Examine The Root Cause Of Any Below Surface Damage.

Sometimes, homeowners discover that something needs to be repaired only after they have ripped out everything. Waterproofing in many bathrooms is inadequate, which means water has continually damaged the flooring over time. As a consequence, the timber beneath the tiles has rotted away.

Prepare For Emergencies With A Cash Contingency Plan For Bathroom Demo

You’ve done your research and know how much you’ll need to spend. Bathroom renovations, on the other hand, are seldom predictable, particularly when it comes to finances. As a result, you should have at least 10% to 15% more money on hand in case of unforeseen expenditures. For example, if your demolition budget is $20,000 and you want to be safe (the more money, the better), add an extra million or two just for good measure.

Make Sure You Have All Of The Materials And Equipment Ready.

The bathroom demo is one-of-a-kind, and the equipment you might require may be different.

However, some of the most common pieces of equipment you should have ready are stated below.

Essential Items For Bathroom Demo

  • An Angling grinder
  • An Impact driver
  • There are many different types of saws, including plaster and power saws.
  • One Utility knife
  • There are many different kinds of hammers, including a demolishing hammer.
  • A Measuring Tape
  • Wheel Barrow
  • Shovel
  • A Wrecking Bar
  • Some Drop Sheets
  • One Ladder

Of course, don’t forget to consider your safety. Make sure you have eye protection and gloves on before you start working. To reduce the chance of hearing damage, use earmuffs when using grinders or any other loud equipment.

Phase 2 – The Removal

If you want to rebuild your bathroom on your own, the next stage is to gut it.

The procedure for removing the bathroom’s facilities is outlined below.

The Vanity And Sink

The true demolition work begins here. Bathroom vanities and sinks are generally simply removed with an adjustable wrench, a pail, and a knife. Use the pail to catch the water that will begin flowing from the drain trap. To remove the nuts, use the wrench instead of your hands.

Toilet

It’s not difficult to remove a toilet. However, removing your sink and vanity is less complicated. A utility knife and an adjustable wrench will be required. If you haven’t switched out your toilet in a long time, you’ll need one socket wrench plus the WD-40.

Here’s how to do it:

  • Locate the threaded pipe or the supply line that enters through the toilet tank. If you’re having trouble finding it, look under the toilet tank for most toilets.
  • Remove the toilet water supply line from the tank and valve. This valve is either on the wall behind your toilet or on the floor. Unscrew and remove the pipe’s connections from both components.
  • The tank should now be removed from the toilet base. If your toilet is a one-piece design, you may skip this step.
  • Remove the nuts and bolts that connect the toilet’s base to the floor using an adjustable wrench. It might be difficult to unscrew them if you haven’t done so for a long time. For loosening screws, spray WD-40 and use a socket wrench.
  • If you need to cut through any caulking around the toilet base, use your utility knife. Remove the toilet from the flange screws.
  • Scrape the wax away from the drain flange on the floor. Remove it with a utility knife. Then remove the drain flange.

There is a drain hole in the back of the toilet for you to stuff rags into to keep the bathroom smelling fresh.

Tiles

It’s now time to focus on tile removal, which is without a doubt the most difficult aspect of any bathroom demolition.

Here are the stages to tile removal if you’re ready to get begin.

  • The vertical line of the tile should be removed using a chisel and hammer. Start at the shower’s edge.
  • Continue along the top of the shower using a horizontal line.
  • Use a reciprocating saw to cut the exposed drywall. Since you should not cut into studs, be extra cautious.
  • Take your pry bar and insert it into the seams. Pry off the tile and backing with your pry bar.
  • Rep the technique for all of the tiled components of the bathroom.

The Bathtub

Let us begin by discussing how to remove a bathtub. A utility knife, pry bar, and screwdriver will all come in handy. Here you’ll use two different types of saws: a jigsaw and a drywall saw.

Now that we’ve established the scene, it’s time to get down to business:

  • Cut the drywall around the tub with your drywall saw. If you took out the tile in this region and it came down, you can skip this step. Once again, keep studs out of your path.
  • Remove the screws from the back of your razor handle.
  • Using your utility knife, cut through the caulking between the bathtub and the floor.
  • Remove the tub from the wall using your pry bars.

If your tub will not fit into one piece, take your jigsaw and cut it out. If the door is big enough for the tub, you may skip this step. Cutting down, on the other hand, might make it easier to carry the tub away from the room.

The bathroom demo is finished!

The post How To Demo A Bathroom appeared first on The Toilet Zone.

Back to Feed